600W~1200W bench programmable dc switching power supply

Basic Info

Model No.: 32VDC series(1U Type)

Additional Info

Packaging: cartons

Transportation: Air

Product Description

Product Introduction: 

APM 32VDC series is 0-1200W programmable dc switching power supply. OVP, OCP, OTP, and OPP protect the power supply and its loads from unexpected conditions. Has large LCD panel display output and parameter simultaneously and a key lock feature to prevent changing the settings. It can be used as 12V bench power supply or 24 volt power supply since the voltage levels up to 32V with flexible auto-ranging output stage.


Areas of Application:

●  Medical Field:Used for medical device testing or it being integrated in medical equipment.

●  LED Sector: Used for LED driver and LED product testing and burn-in test.

●  Aerospace Sector: Used for aviation electronic products testing and power supply.

●  Communication Sector: Used for the tests of communication power supply and electronic devices.

●  Automobile Sector: Used for automobile electronics product testing,and simulation of the voltage  waveform of automobile under different conditions.

●  Automatic Testing Sector: Can be integrated in automatic testing system to test electricity parameters, and to supply power to the products under testing. 

●  Household Field:Used for household products test. 

●  Scientific Research Sector:Used in scientific research units, colleges & universities,and certification institutions for laboratory testing and power supply.


Product Features:

●  With accurate voltage and current measurement capability.

●  DVM independent measurement functions.

●  Use SCPI commands.

●  CE/UL/CSA/FCC certified.

●  Coded knobs, multifunctional keyboard.

●  Standrad RS232/LAN/RS485/USB interface.

●  Function of editing List waveform.

●  Remote sensing to compensate for voltage drop in load leads.


Product Advantages:

1)High efficiency
APM programmable 20VDC source has an operating efficiency of up to 89%. In the circuit design, switch tube is using zero (0) voltage conductor and when the circuit is running, the damage inflicted on the device itself is reduced, and subsequently increase the overall efficiency while lowering the rate of temperature rise of the DC source. Compare with other similar types of product in markets, APM Technologies' programmable DC source has an obvious advantage.

(2)Ultrafast Respond Time

The unique fast drop function makes the response of APM programmable DC source much better than that of any other similar products available on the market. 

Model SP32VDC600W SP32VDC1000W SP32VDC1200W SP32VDC1600W

response(voltage rise time)

≤12ms

≤10ms

response(voltage drop time)

≤150ms(No load)

≤150ms(No load)

≤150ms(No load)

≤150ms(No load)

≤20ms(Full load) ≤15ms(Full load) ≤12ms(Full load) ≤10ms(Full load)
(3)DVM measurement function
APM programmable DC source's built-in DVM independent measurement function can measure the value of output voltage at the output terminal, and display the value at VFD screen by switchover the front-panel buttons. The DC source can also be used as external equipment in laboratory testing to measure the voltage values.

(4)Master/Slave Control
In the master-slave control mode, up to 10 units of APM programmable DC source can be used in a series or parallel mode.

(5)Series Mode Functions

APM programmable 32 VDC source via its RS485 interface can be operated  by using up to 31 units of the device ,thus makes it possible to simultaneously control all the DC sources connected on RS485 from PC.





Technical Specification:


Model
SP32VDC600W
SP32VDC1000W
SP32VDC1200W
 SP32VDC1600W
1 Input Voltage Range
90-265VAC
2 Input Frequency Range
47-63Hz
3 Power Factor
>0.98
4 Input Power
750VA(MAX)
1300VA(MAX)
1500VA(MAX)
2000VA(MAX)
5 Output Voltage Range
0-32V
6 Output Current Range
0-50A
7 Voltage Load Regulation
10mV
8 Current Load Regulation
50mA
9 Voltage Setting Accuracy
0.05%+15mV
10 Current Setting Accuracy
0.1%+50mA
11 Voltage Measurement Accuracy
0.05%+15mV
12 Current Measurement Accuracy
0.1%+50mA
13 Voltage Ripple[1]
40mVp-p/6mVrms
14 Current Ripple[1]
50mA (Full Range)
20mA (TYP value)
15 Voltage Temperature Coefficient[2]
100ppm/℃
16 Current Temperature Coefficient[2]
150ppm/℃
17 DVM Resolution
0.1mV
18 DVM Accuracy
0.05%+15mV
19 Remote Compensation
4V MAX
20 Load Transient Response Time
≤2ms
21 Command Response Time
50ms
22 Efficiency(Full Load)
86%
89%
89%
89%
23 Protection Function
OVP/OCP/OTP/OPP/SCP/Fold back function
24 Weight
9.5kg
25 Communication Modes
RS232/RS485/USB/LAN
26 Operating Environment
Temperature 0~40℃,Relative Humidity 10%~90%(no condensation)
[1] Test Condition: Voltage ripple, CV (Constant Voltage) mode-rated output voltage (Vp-p   20MHZ, Vrms 1.25MHZ); Current ripple: CC (Constant Current) mode (Arms  1.25MHZ)
       Current ripple typical value parameter standard, test under condition that nominal voltage of the model is fully loaded, at the same time, when the full range output voltage of the model is full load output, the effective value of the current ripple is among the gamut reference range.
[2] Test Condition: Ambient temperature is among 0~40℃


Contact Information

CONTACT US

APM Technologies (Dongguan) Co., Ltd

Contact Person: Emily Cui

Phone:86-769-22028588-2892

Fax:86-769-22026771

Address: #7,Link Information Industry Park, Shuilianshan Road, Nancheng,Dongguan,Guangdong

Full name Contact Phone Content
点击刷新验证码