High current 30V dc power supply 3000W

Basic Info

Model No.: 32VDC series(2U Type)

Additional Info

Packaging: cartons

Transportation: Air

Port: DHL

Product Description

Product Introduction: 

The 32VDC series 2U units are single output from 1000W to 4000W high current bench power supply with 200A. These units are provided with an active power factor correction circuit.Comparing with other power supplies available in the market, APM supports a most complete array of interfaces including USB, LAN, RS232, RS485, analogue control interface,only GPIB is optional. Due to the wide range output, 32v Power Supply28v dc power supply can be easily achievable.

There are more models,  20V DC Power Supply, 40V DC Power Supply,75V DC Power Supply,80V DC Power Supply,120V DC Power Supply for your reference.

Areas of Application:

●  Automatic Testing Sector: Can be integrated in automatic testing system to test electricity parameters, and to supply power to the products under testing. 

●  Aerospace Sector: Used for aviation electronic products testing and power supply.

●  Automobile Sector: Used for automobile electronics product testing,and simulation of the voltage  waveform of automobile under different conditions.

●  Communication Sector: Used for the tests of communication power supply and electronic devices.

●  LED Sector: Used for LED driver and LED product testing and burn-in test.

●  Household Field:Used for household products test. 

●  Scientific Research Sector:Used in scientific research units, colleges & universities,and certification institutions for laboratory testing and power supply.

●  Medical Field:Used for medical device testing or it being integrated in medical equipment.

Product Features:

●  DVM independent measurement functions.

●  Coded knobs, multifunctional keyboard.

●  Standrad RS232/LAN/RS485/USB interface.

●  With accurate voltage and current measurement capability.

●  Function of editing List waveform.

●  Remote sensing to compensate for voltage drop in load leads.

●  Use SCPI commands.

●  CE/UL/CSA/FCC certified.

Product Advantages:

(1)High efficiency
APM programmable 32VDC source has an operating efficiency of up to 91%. In the circuit design, switch tube is using zero (0) voltage conductor and when the circuit is running, the damage inflicted on the device itself is reduced, and subsequently increase the overall efficiency while lowering the rate of temperature rise of the DC source. Compare with other similar types of product in markets, APM Technologies' programmable DC source has an obvious advantage.

(2)Ultrafast Respond Time
The unique fast drop function makes the response of APM programmable DC source much better than that of any other similar products available on the market. 

Model SPS32VDC1000W SP32VDC2000W SP32VDC3000W SP32VDC4000W 

response(voltage rise time)

≤20ms(No load)

≤20ms(No load)

≤20ms(No load)

≤20ms(No load) 

≤40ms(Full load) ≤30ms(Full load) ≤20ms(Full load) ≤20ms(Full load)

response(voltage drop time)

≤500ms(No load)

≤500ms(No load)

≤500ms(No load)

≤500ms(No load)

≤45ms(Full load) ≤30ms(Full load) ≤25ms(Full load) ≤20ms(Full load)

(3)DVM measurement function
APM programmable DC source's built-in DVM independent measurement function can measure the value of output voltage at the output terminal, and display the value at VFD screen by switchover the front-panel buttons. The DC source can also be used as external equipment in laboratory testing to measure the voltage values.

(4)Master/Slave Control
In the master-slave control mode, up to 10 units of APM programmable DC source can be used in a series or parallel mode.
Master-slave control mode can realize the effect as "a hundred responses to a (single) call". Once the master-slave mode is settled, "SLAVE" will be locked in the main interface and exclusively controlled by "MASTER". When there is a "SLAVE" signaling of protection mode, all the DC sources will turn off and exit master-slave mode.

(5)Series Mode Functions

APM programmable 32 VDC source via its RS485 interface can be operated  by using up to 31 units of the device ,thus makes it possible to simultaneously control all the DC sources connected on RS485 from PC.

Technical Specification:

1 Input Voltage Range
2 Input Frequency Range
3 Power Factor
4 Input Power
5 Output Voltage Range
6 Output Current Range
7 Voltage Load Regulation
8 Current Load Regulation
9 Voltage Setting Accuracy
10 Current Setting Accuracy
11 Voltage Measurement Accuracy
12 Current Measurement Accuracy
13 Voltage Ripple[1]
14 Current Ripple[1]
400mA (Full Range)
200mA (TYP value)
15 Voltage Temperature Coefficient[2]
16 Current Temperature Coefficient[2]
17 DVM Resolution
18 DVM Accuracy
19 Remote Compensation
20 Load Transient Response Time
21 Command Response Time
22 Efficiency(Full Load)
91% 91%
23 Protection Function

If fold back function is not included, customers can purchase other accessories to achieve this function,

please consult the sales representative for details.

24 Weight
25 Communication Modes

26 Operating Environment
Temperature 0~40℃,Relative Humidity 10%~90%(no condensation)
[1] Test Condition: Voltage ripple, CV (Constant Voltage) mode-rated output voltage (Vp-p   20MHZ, Vrms 1.25MHZ); Current ripple: CC (Constant Current) mode (Arms  1.25MHZ)
       Current ripple typical value parameter standard, test under condition that nominal voltage of the model is fully loaded, at the same time, when the full range output voltage of the model is full load output, the effective value of the current ripple is among the gamut reference range.
[2] Test Condition: Ambient temperature is among 0~40℃

Contact Information


APM Technologies (Dongguan) Co., Ltd

Contact Person: Emily Cui



Address: #7,Link Information Industry Park, Shuilianshan Road, Nancheng,Dongguan,Guangdong

Full name Contact Phone Content