800V High voltage dc power supply 1kW-4kW

Basic Info

Model No.: 800VDC series(2U Type)

Additional Info

Packaging: cartons

Transportation: Air

Product Description

Product Introduction: 

APM 800V Dc Power Supply are ideal for high voltage device and material testing. Available in a rack mounting or benchtop at 1000W/2000W/3000W/4000W power levels with single output voltages ranging from 0 to 800V and current capabilities up to 7.5A. The high quality and reliable desktop dc power supply can easily satisfy your requirements for your applications.


Areas of Application:

●  Household Field:Used for household products test. 

  Scientific Research Sector:Used in scientific research units, colleges & universities,and certification institutions for laboratory testing and power supply.

●  LED Sector: Used for LED driver and LED product testing and burn-in test.

  Aerospace Sector: Used for aviation electronic products testing and power supply.

●  Automobile Sector: Used for automobile electronics product testing,and simulation of the voltage  waveform of automobile under different conditions.

●  Automatic Testing Sector: Can be integrated in automatic testing system to test electricity parameters, and to supply power to the products under testing. 

●  Medical Field:Used for medical device testing or it being integrated in medical equipment.

●  Communication Sector: Used for the tests of communication power supply and electronic devices.


Product Features:

●  Standrad RS232/LAN/RS485/USB interface.

●  Remote sensing to compensate for voltage drop in load leads.

●  DVM independent measurement functions.

●  Function of editing List waveform.

●  Coded knobs, multifunctional keyboard.

●  CE/UL/CSA/FCC certified.

●  With accurate voltage and current measurement capability.

●  Use SCPI commands.


Product Advantages:

(1)High efficiency
APM programmable 800VDC source has an operating efficiency of up to 92%. In the circuit design, switch tube is using zero (0) voltage conductor and when the circuit is running, the damage inflicted on the device itself is reduced, and subsequently increase the overall efficiency while lowering the rate of temperature rise of the DC source. Compare with other similar types of product in markets, APM Technologies' programmable DC source has an obvious advantage.
(2)Ultrafast Respond Time
The unique fast drop function makes the response of APM programmable 800VDC source much better than that of any other similar products available on the market. 

 No load voltage rise time

 ≤60ms

 Full load voltage rise time

 ≤60ms

 No load voltage drop time

 ≤800ms

 Full load voltage drop time

 ≤60ms

(3)DVM measurement function
APM programmable DC source's built-in DVM independent measurement function can measure the value of output voltage at the output terminal, and display the value at VFD screen by switchover the front-panel buttons. The DC source can also be used as external equipment in laboratory testing to measure the voltage values.
(4)Master/Slave Control
In the master-slave control mode,  can not be in series, can be 10 units in parallel.
Master-slave control mode can realize the effect as "a hundred responses to a (single) call". Once the master-slave mode is settled, "SLAVE" will be locked in the main interface and exclusively controlled by "MASTER". When there is a "SLAVE" signaling of protection mode, all the DC sources will turn off and exit master-slave mode.
(5)Series Mode Functions
This 800V series can support RS485 BUS communication interface, up to 31 units. It can simultaneously control all the DC sources connected via RS485 bus from one PC, which is easy for users to monitor operation
.



Technical Specification:


Model
SPS800VDC1000W
SP800VDC2000W
SP800VDC3000W
 SP800VDC4000W
1 Input Voltage Range
90-265VAC
190-265VAC
190-265VAC
190-265VAC
2 Input Frequency Range
47-63Hz
3 Power Factor
>0.98
4 Input Power
1300VA(MAX)
2400VA(MAX)
3400VA(MAX)
4500VA(MAX)
5 Output Voltage Range
0-800V
6 Output Current Range
0-7.5A
7 Voltage Load Regulation
200mV
8 Current Load Regulation
20mA
9 Voltage Setting Accuracy
0.05%+200mV
10 Current Setting Accuracy
0.1%+7.5mA
11 Voltage Measurement Accuracy
0.05%+200mV
12 Current Measurement Accuracy
0.1%+7.5mA
13 Voltage Ripple[1]
800mVp-p/200mVrms
14 Current Ripple[1]
25mA (Full Range)
10mA (TYP value)
15 Voltage Temperature Coefficient[2]
100ppm/℃
16 Current Temperature Coefficient[2]
150ppm/℃
17 DVM Resolution
12mV
18 DVM Accuracy
0.05%+200mV
19 Remote Compensation
5V MAX
20 Load Transient Response Time
≤3ms
21 Command Response Time
50ms
22 Efficiency(Full Load)
85%
91%
91%
92%
23 Protection Function
OVP/OCP/OTP/OPP/SCP/Fold back function
24 Weight
14.7kg
25 Communication Modes
Standard:RS232/RS485/USB/LAN, 
Option:RS232/RS485/USB/LAN/GPIB

26 Operating Environment
Temperature 0~40℃,Relative Humidity 10%~90%(no condensation)
[1] Test Condition: Voltage ripple, CV (Constant Voltage) mode-rated output voltage (Vp-p   20MHZ, Vrms 1.25MHZ); Current ripple: CC (Constant Current) mode (Arms  1.25MHZ)
       Current ripple typical value parameter standard, test under condition that nominal voltage of the model is fully loaded, at the same time, when the full range output voltage of the model is full load output, the effective value of the current ripple is among the gamut reference range.
[2] Test Condition: Ambient temperature is among 0~40℃


Contact Information

CONTACT US

APM Technologies (Dongguan) Co., Ltd

Contact Person: Emily Cui

Phone:86-769-22028588-2892

Fax:86-769-22026771

Address: #7,Link Information Industry Park, Shuilianshan Road, Nancheng,Dongguan,Guangdong

Full name Contact Phone Content
点击刷新验证码